About Us
Leading the N-Era

DAS Solar is a leading high-efficiency N-type silicon cell and module manufacturer in China. Founded in 2018, DAS Solar took the lead in establishing China's first 1.2 GW/y production line of high-efficiency TOPCon cells, which filled an industry gap. Through continuous scientific and technological innovation, DAS Solar has enhanced the presence in the N-type cell industry. The laboratory efficiency of the N-type TOPCon cells has exceeded 26%. The efficiency of the cells will be raised to 26% by developing  passivation contact technology and improving the carrier selection rate. The perovskite/silicon tandem cell technology under development will break the theoretical limit (29.4%) of crystalline silicon cells, and the industrialized cell efficiency will exceed 32%.

 

Seven major innovations
for efficiency improvement

High-efficiency Modules
with Better Performance

A steel frame is used instead of an aluminum frame

A steel frame is used instead of an aluminum frame to improve the frame expansion coefficient and glass matching. It also results in an alleviation of the risk of sealant failure.

PPO and other eco-friendly materials are used as boxes

PPO and other eco-friendly materials are used as boxes, and high-quality chips and diodes with better heat dissipation have been selected. Dedicated junction boxes reduce power losses by 1%, so that the first-year attenuation of PV modules is less than 1%.

Lead-free solder strips are used

Lead-free solder strips are used, and high-specification lead-free solder strips have been introduced into the module production line to create lead-free packaging technology, so as to address various RoHS requirements.

Dealcoholized silica gel is used as packaging materials

Dealcoholized silica gel is used as packaging materials to avoid volatile odors; its excellent adhesion to various surfaces and outstanding thermal stability and mechanical properties helps extend module life and reduce O&M costs.

Fluorine-free backplanes

Fluorine-free backplanes are used to enable eco-friendly recycling of modules. In addition, the fluorine-free backplanes and adhesive films are designed with a strong bonding capacity, as well as aging resistance and excellent UV resistance. They are also designed with low MVTR, while the PO film and PET are particularly designed to have two moisture and vapor barrier layers, so that the modules can provide a 25 year service life.

More Competitive
Systems for Lower LCOE

By virtue of the high-efficiency N-type cells, DAS Solar has developed three series of high-efficiency N-type products with full power coverage under the DAON brand, to exhibit its latest strength in innovation, module R&D, and mass production of high-efficiency N-type cells. Benefiting from the lower power attenuation, higher bifaciality, low temperature coefficient, and increased low irradiation performance of N-type modules, DAON N-type modules can generate up to 5% more power than P-type modules at the same installed capacity, thereby significantly reducing the kilowatt-hour cost of PV systems and the earning rate of PV power plants.

DAS Solar developed PV systems with flexible bracket, amphibious PV systems, floating PV systems, PV energy storage, charging integrated parking lots, and other applications. DAS Solar's DAON N-type products (PV system with flexible bracket) exhibit obvious superiorities in PV sand control, offshore wind-solar combined farm, expressway slope PV, and other new applications.

The analysis of such strengths as integrated solar-electric energy conversion efficiency, bifaciality, annual decay rate, temperature coefficient, low light responsiveness, hot spot effects, low risk of hidden cracks, and BOS system cost sharing, for various applications revealed that DAON N-type products have obvious superiorities in kilowatt-hour costs.

Adhering to a technology leading strategy, DAS Solar has been committed to offering green products with high quality, high efficiency, and high reliability. DAS Solar has constantly improved cell and module efficiency by means of overlaying large silicon wafers, passivation contact technology, gradient film technology, ultra-thin polysilicon technology, edge passivation technology, multi-main grid technology, half-cell technology, and other cutting-edge packaging technologies.

This site uses cookies to offer you a better browsing experience. Find out more onhow we use cookies.